JETCONNEX™
Trailer Hitch Connector Cable
JetConnex™
replaces the “spaghetti” that connects the vehicle lights to the
trailer lights. JetConnex™ can be used with many vehicles that tow
trailers including Pick-Up Trucks, SUV’s and big old Caddy’s. The
trailers tow boats, jet skis, snowmobiles, car trailers, motorcycles,
ATV’s, and bikes.
Everyone who tows a trailer has their share of mishap stories--from
traffic tickets to accidents to just plain hook-up frustrations--caused
by flimsy wire and connections.
The JetConnex™ replaces those flimsy wires that hang down (and drag)
between the vehicle and trailer, with a high-quality Tractor-type
coil-cord with reliable molded connectors.
WHY THE COIL CORD?
When
towing a trailer, you need to have some play in the connecting wire to
allow you turn a corner. To accomplish that with spaghetti you let the
wire sag across the hitch area. Not only does this look awful, it often
ends up dragging on the ground and causing electrical shorts. With the
JetConnex™ the coil remains tight and simply stretches when the vehicle
turns. …. And it looks sleek and cool.
THE CONNECTORS
MOLDED STRAIN RELIEF'S
all connectors come with a molded strain relief to prevent the wire
inside from breaking when the cord is bent near the terminal. |
|
PULL-PROOF PLUGS
On all our molded connectors, a metal ring is wrapped around the wire
jacket before the connector is molded to the cord. This means that the
connector is attached to the jacket. No matter how hard you pull on
the connectors you can’t pull the wire out; because you aren’t pulling
on the wires, you are pulling on the jacket. |
PLATED TERMINALS
We designed the metal contacts to closer tolerance than you find on
your normal “spaghetti” wire. This means that every time you connect
and disconnect your JetConnex™ it wipes off the crud and corrosion that
builds up on the terminals in harsh conditions causing shorts and
electrical failures. |
|
