KODIAK 13 inch Trailer Disc Brake Assy, Stainless Steel, DAC (Complete 1 Axle Kit) with Stainless Steel Calipers - Bearings Included.
KODIAK 13" DAC Vented Integral Rotor/Hub assembly, Caliper & Mounting Bracket w/Hardware. Please note, bearings and seals sold separately.
Silver cadmium plating offers the best value of protection for salt water applications (i.e., during a standard salt spray test, rust will begin forming between 400 and 600 hours).
The INTEGRAL (One Piece) Hub & Rotor is cast as a single unit. Wheel studs are pressed into the rotor. Hub and rotor are balanced as one unit, which offers a smoother ride. Caliper mounts to 5 bolt brake flange and fits inside 15" and larger wheels. Caliper is loaded standard with Non-Asbestos Ceramic friction pads. Kit also includes inner bearing & race, outer bearing & race, grease seal. These Rotors/Hubs can be filled with the appropriate Grease or Hydraulic Oil. Refer to your installation manual before use.
Integral 13" hub and rotor (one piece), 865 wheel bolt pattern, 9/16" wheel bolts. Caliper bracket mounts to 5 bolt brake flange and fits inside 16” and larger wheels. (Must use 8K outer bearing# 02475).
(Bearing & seals are sold separately with integral brake sets)
4 ea. Bearing #25580
4 ea. Bearing #14125A
4 ea. Seal #22333TBN
Automotive Quality Casting. Rotors are 100% tested and balanced to meet very strict specifications. Our Rotors are vented to improve heat dissipation.
All gray iron Kodiak rotors are 35,000 PSI tensile strength castings for longer rotor life, improved structural integrity and superior performance.
All Rotor/Hub-133-8 are furnished with industry standard polycarbonate screw-in oil cap (can be used with grease).