CTS Marine Hydrastar™ 1600 PSI Electric/Hydraulic Actuator #MHBA-16

CTS Marine Hydrastar™ 1600 PSI Electric/Hydraulic Actuator #MHBA-16

Out of Stock
Part Number:ST-381-8067

When you need to stop immediately while pulling a heavy trailer, a mere one second delay from your brake actuator can translate into a potentially serious accident. Delivering the industry's speediest response time when it comes to trailer braking, HydraStar™ trailer-mounted, electric over hydraulic brake actuators offer the ability to adjust actuator output using the cab controller directly from your driver's seat. Easy to install and meeting all federal braking and DOT requirements, the HydraStar™ actuator lets you establish hydraulic brake parameters to match load weight for maximum safety and control. It's the perfect actuator for providing a reliable braking system you can depend on when hauling horse railers, vehicle/RV trailers and all other trailers equipped with hydraulic brakes. The line of HydraStar™ brake actuators also include the Marine HydraStar™ MHBA-16, an actuator with high-quality, marinized housing that makes it ideal for use with all boat trailers. HydraStar™ actuators also replace hydraulic/vacuum, hydraulic/air and surge systems.

Features Include:
• EPDM Gasket Material (Marine Version)
• Stainless Steel Screws  (Marine Version)
• Specific Waterproof Vented Enclosure (Marine Version)
• Marine Wiring (Marine Version)
• Only four wires to connect, 3 wires go to the tow vehicle receptacle, the fourth goes to the breakaway switch
• Works in reverse, no more pins to insert before backing up
• Eliminates brake drag common with surge actuators on down hill grades
• HydraStar installs on trailer with minimal wiring
• Meets or exceeds DOT brake actuator regulations
• Unit mounted bleeder makes bleeding the brake lines easier
• Engages trailer brakes when tow vehicle brake pedal is applied or when the in cab controller
override is activated
• Water tight extruded aluminum enclosure protects the unit in all weather conditions
Regulatory Compliant
• Fully compliant with CFR-393 federal braking requirements
• Includes detailed instruction manual
Note that the tow vehicle must be equipped with an industry standard electronic brake

• Application: Trailers with disc brakes
• Maximum output pressure: 1,600 psi. Pressures for various trailer brake configurations – prevents over pressurizing your brakes and damaging seals (Check with trailer brake manufacturer for pressure specifications)
• Vehicle requires an In-cab electric brake controller (sold separately) and a 7-Way trailer connector.
• Dimensions: 11-3/4" long x 3" wide x 7-3/8" tall
• 2-Year limited warranty

5 Stars
Very good and knowledgeable people that made it easy for me to to buy and install . I'm very happy with your products and your sales people.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Benson,Az.. on 10/6/2019

Recently Viewed Items